http://oneshabbychick.typepad.com/one_shabby_chick/2011/01/an-ipad-cover-tutorial.html
I started mine off as a trial and error sewing project, but thought I share what I found online that resembles most what I did.
Materials used:
All-purpose foot
Sewing machine - Singer 160 and matching colour thread
allow 1/2" seam allowances each side
Actual iPad with plastic case measures approximately 8.5" W x 10.5" L x 1.5" thickness
Outer fabric and inner fabric used - same style and print, 4 pieces of 12.5' x 8.5" or
2 pieces of 25" x 10.5" inner lining (Fabric used was Filligree Textiles Pty Ltd, Noah's Ark uncoated Decor fabric. 100% Cotton
Flap: 2 pieces of 10.5" x 5"
Batting for flap: 1 x 10.5 x 5"
Pocket: 2 pieces blue poplin fabric 7" x 9"
Button - 2-3cm diameter
Batting - cut to same size as the outer fabric and inner lining
I allowed 2" extra for seams and bit of room
Inner pocket: 1 piece of 10.5" x 10".
As it turned out, the pocket was not quite centred. But, quite roomy to contain earphones, power plugs etc.
No comments:
Post a Comment